Knowledgebase
Norstar Voicemail System information - Adding a Group List
Posted by Kevin Hill on 26 July 2010 05:24 PM
Adding a Group List:

Feature 983

1) LOG: 120000 (2 digit ext's) or 1020000 (3 digit ext's) or 10020000 (4 digit ext's)

2) Press OTHR

3) Press GLIST

4) Press ADD

5) GList: 901 / 902 / 903 etc.

6) Press OK

7) Record name: (record the Group List name, such as: "Sales Group" or "Customer service")

8) Press OK

9) Accept Name:

10) Press OK to accept or RETRY to re-record the name

11) Name: (Name the group list according to its purpose; example, if you recorded the name "sales Department", name the group list "SALES") Use the dial-pad to spell the name, the same as you would adding a mailbox. (Use the # key to advance to the next letter)

12) Press OK

13) Mbox: Enter the first Mailbox you wish to be within the Group List. Example: 221

14) Example: Smith, Sally

15) Press ADD to add the mailbox to the list or RETRY to re-enter the mailbox number.

16) Mbox: Enter the second Mailbox you wish to be within the Group List. Example: 222

17) Example: Douglas, Chip

18) Press ADD to add the mailbox to the list or RETRY to re-enter the mailbox number.

19) Repeat steps 13 through 15 for each Mailbox you wish to add to the Group List

20) After adding all of the Mailboxes you wish to be a part of the group, Press QUIT.

Press RELEASE
(0 vote(s))
This article was helpful
This article was not helpful

Help Desk Software by Kayako Fusion